HMA Profile Adapter Kitadapter plates for mounting the HMA150 on a profile cockpit
Fits the HMA150 to your profile
- 143.29mmPlate length
- 48.68mmPlate width
- 6mmThickness
- 120mmMax hole spacing
1-month GEEKSHOP warranty · Pre-order — no payment now
A closed central rail is no longer a blocker
The HMA Profile Adapter Kit is MOZA's official accessory for the HMA150 motion system. These are adapter plates that let the actuators bolt to an aluminium profile cockpit rig: they widen the list of compatible rigs and give a rigid, play-free joint. The HMA150 itself mounts on 4080, 40120 and 40160 profile, but when a 40120 or 40160 rig has a closed central rail the standard fixing is not enough — that is exactly the case this kit covers. Check the construction of your cockpit before ordering: an open rail means the kit is optional, a closed one means it is required. The plate is shaped to follow the actuator body: 143.29 mm long, 48.68 mm wide and 6 mm thick. It carries six 8.2 mm holes for the profile hardware and two larger 19.2 mm holes, with hole spacing of 40, 80 and 120 mm along the centre line. Installation is bolt-on; no separate power or electronics connection is needed.
- 01
Why the adapter exists
The HMA150 bolts straight onto 4080, 40120 and 40160 European-standard aluminium profile. But on some 40120 and 40160 rigs the central rail is closed, and the standard hardware cannot reach the slots in that construction. The adapter plates solve exactly that: they move the fixing points outboard and let the actuator bear on the profile along its full length.
- 02
Geometry made for both profile and actuator
The plate is 143.29 mm long and 48.68 mm wide, following the outline of the actuator body, and 6 mm of thickness carries the load without flexing. Six 8.2 mm holes take standard aluminium-profile hardware, and two 19.2 mm holes clear the actuator's own fittings. Hole spacing of 40, 80 and 120 mm along the centre line matches the European profile grid.
- 03
Check your rig before ordering
Not everyone needs this kit. If your cockpit is built from 4080 profile, or your 40120/40160 rig has an open central rail, the HMA150 mounts as standard and no adapter is needed. A closed central rail is the opposite case: without the plates the actuators cannot be fixed. Look at the profile section and whether the slots in the central rail are accessible, and send the manager a photo of the rig if you are unsure.
Compatibility
An accessory for the MOZA HMA150 motion system only. It is required for 40120 and 40160 aluminium profile cockpits with a closed central rail; on 4080 rigs and profiles with an open rail the HMA150's own fixing is enough. Check the profile section and central-rail construction of your cockpit before ordering.
- Fits the HMA150 to closed-rail 40120 and 40160 profile
- Rigid bolt-on mount with no play
- 143.29 × 48.68 × 6 mm plate shaped to the actuator
- Needs no power and no electronics connection
Specifications
- Designed for
- MOZA HMA150 motion system
- When it is required
- 40120 and 40160 profile rigs with a closed central rail
- Cockpit type
- Aluminium profile cockpits
- Installation method
- Bolt-on, no power or cabling
- Overall length
- 143.29 mm
- Width
- 48.68 mm
- Thickness
- 6 mm
- Fixing holes
- 6 holes, ⌀8.2 mm
- Large holes
- 2 holes, ⌀19.2 mm
- Hole spacing
- 40 / 80 / 120 mm along the centre line
- Part number
- MP003
- EAN
- 6973137271626
Specs as published by MOZA
Questions
Do I need this kit if I am buying the HMA150?
Not necessarily. The HMA150 mounts as standard on 4080, 40120 and 40160 European aluminium profile. The adapter is needed when a 40120 or 40160 rig has a closed central rail — without the plates the actuators cannot be fixed there. With an open rail the kit is not required.
How many plates are in the kit?
MOZA does not publish the exact contents on the product page, so we do not state a number. The official renders show a pair of plates. A complete HMA150 system uses four actuators — the GEEKSHOP manager will advise how many kits you need when confirming the order.
Do I need tools or any electronics connection?
It is a purely mechanical adapter: the plates bolt between the actuator and the cockpit profile. No power, no cabling and no software setup — all motion parameters are still set in MOZA Motion Manager on the HMA150 side.
How does the preorder work?
This item is sold on preorder. After you place the order a GEEKSHOP manager will contact you, confirm it and check which cockpit profile you have. The indicative lead time is about a month from confirmation.
No customer reviews yet — and we do not make them up.
HMA Profile Adapter Kit
We do not take payment now. A GEEKSHOP manager will contact you to confirm availability, the delivery date and payment.
1-month GEEKSHOP warranty · Delivery across Uzbekistan — quoted by the manager
